Showing posts with label modge podge. Show all posts
Showing posts with label modge podge. Show all posts

Monday, December 17, 2012

Pin 56 Reusing/Repurposing Empty Beer or Soda Glass Bottles into Glitter Vases

My husband is addicted to a brand of soda called Ski.   Literally addicted to it,  I call it his "crack".   We special order this soda so he can get it in glass bottles still made with actual cane sugar.  He goes through a ton so we also have bottles and bottles and bottles and bottles and bottles and bottles (you get the picture, lol) in our recycling bin.   I reused some in a previous pin, Pin 33 tinting bottles with modge podge & food coloring, and wanted to try something different with a few more.  I'm sure if you have followed my blog you have come to realize that I LOVE glitter, so when I saw this pin I knew I was going to have to try it.


Supplies needed:

Glass bottles (beer/soda/whatever you want to try it with)
Fine Glitter
Modge Podge or other glue/adhesive
Painters Tape
Ruler
Marker

First pull any labels off your bottles.   I didn't bother to scrub off any of the sticky goo left from the labels since I was just going to be putting sticky goo back on the bottle  to hold the glitter. 

Empty Soda and Beer Bottles getting ready to be hit with some glitter and repurposed as vases

I then grabbed a ruler and a sharpie and measured where I wanted my tape to go.  It's not necessary to measure if you can create a straight line buy just eyeballing it.....I just don't have that ability.

Measuring Glass Bottle to be reused as a glitter vase so it has a straight line

If you mark your bottle make sure you place your tape just above the lines so the glitter will cover up the marks.   Tape around your bottle.

Empty Beer and Soda Glass Bottles Taped off waiting for glitter to be applied to be turned into vasees

Now a smart person would have thought ahead and dished out some modge podge and mixed glitter into it, then brushed it on.   If you do this you will want a lot of glitter (at least I would, he he!)  I did mine by brushing modge podge on the bottles in strips.

Glass Soda bottle taped off and coated in modge podge waiting for glitter to be put on to be turned into a vase

Then sprinkle the glitter on to the area.  Then just repeat glue followed by glitter till you go all the way around the bottle.  I wanted a very thick coat of glitter so I actually put modge podge on top of the glitter that was already on the bottle and sprinkled on even more glitter.

Glitter freshly applied to a glass beer bottle to be turned into a vase

Let the bottles dry.  Do not do what I did and forget about taking the tape off till they were completely dry.  You will get a much cleaner edge if you remove the tape while the glitter/paint is still damp.

Empty Soda & Beer Bottles Decorated in Glitter to repurposed as Vases

My girls wanted to add some embellishments so I let them, but I actually dont' mind them plain.  These will be getting re-used as small vases.  They are good for lone flowers.  My girls have been wanting me try duct tape flowers so we might make some to put in these. (I wonder if I could glitter those?)

Beer and Soda Bottles Covered in Glitter reused as a a vase with embellisments

With a flower..

beer or soda glass bottle repurposed as a glittered vase

Since everything but the glitter came from stashes or the recycling bin this was a very economical project.....we spent $1 on the glitter at Michael's.  I would probably do this again and again but I'm not sure where I would put them all.


Follow Me on Pinterest

Wednesday, December 5, 2012

Pin 40 Glittered Clothes Pin Magnets

I had ultimately planned to get a few things done today, but let me tell you this darn Strep throat is kicking my butt! Only thing this Mama has wanted to do for the past week is crawl into bed, and not come back out for days!   I seriously had to go with something simple, something that.........ummmm I might have started before I got sick (he!he!) but just now finished.  What mom does not need a ton of magnets to hang their children's masterpieces ?!?!  And the fact that this pin has glitter in it made it impossible for me to look past.

This certainly seemed simple enough, and considering I always have glitter on hand (I love my glitter!) relatively cheap.  I mean you can get a pack of clothes pins at the Dollar Tree for a $1 or still pretty darn cheap even at Kroger's or Wal-Mart.  Most crafters have some sort of Modge Podge on hand, and the magnets aren't too bad either if you know where to look.  If you want the good magnets that will actually hold papers up and not start sliding down the fridge, you need the  Neodymium Rare Earth Magnets. They come in various sizes, and let me tell you these things are pretty darn powerful.  I get mine from a wonderful seller on Etsy Sun and Moon Craft Kits.  They have some of the best prices and seriously quick shipping!   I use the 1/4" magnets.  

To get started you need:

Clothes Pins
Glitter
Modge Podge
Magnets
Sealant of some kind
E6000 (to glue the magnet to the clothes pin)
Tray to catch the excess glitter

Fixins for glitter covered clothes pin magnets

To get started you need to slather your clothes pin in Modge Podge.  Since I did this right after I used the tinted Modge Podge on the bottles, I just continued to use the tinted Modge Podge I already had. I figured you weren't going to see it anyway.

clothes pin painted with modge podge waiting for its glitter

Sprinkle your choice of glitter on top of the clothes pins.  I did mine two at a time.  I only wanted two of each color of glitter.  If you are doing several of one color, you can Modge Podge them all, then sprinkle the glitter. Once they are all covered in glitter just let them dry.  You want them to dry completely before you seal them.  Sealing them will prevent the glitter from rubbing off.

glittered clothes pins for magnetstotally glittered clothes pin magnets

Once they are dry, seal them.  I just used a clear spray paint.  It was the closest thing to me.  Once the sealant dries, you can glue the magnets to the back.
showing size of magnet

You need to use a good strong glue when you glue the magnets on.  I like E6000.  You can get it at craft stores or even at Wal-mart. Use this in a well ventilated area.  It STINKS!  This stuff is strong so don't get it anywhere you don't want it. 

E6000 strong craft glue

Just put a dab of the glue on the clothes pin.  I found it much easier to place the magnet right over the springs on the back.   If I tried to place them higher or lower they still eased there way to the metal anyway.   Let them dry.   This will take a little bit.   When they are drying make sure you don't lay them directly beside each other, if you do you might end up with a pile of clothes pins thanks to the magnets being attracted to each other......

magnets drying on the back of the clothes pins

Once they are dry, that's it, your done.....

Finished glittler clothes pin magnets
Finished Glittered Clothes Pin Magnets holding Santa

We'll be making more of these to go with the Teacher's gifts this year. Simple, easy and thrifty!

Follow Me on Pinterest

Thursday, November 29, 2012

Pins 33, 34 Tinting glass bottles with Food Coloring & Modge Podge and Coffee Filter Snowflakes

I always seem to have a ton of bottles on my counter.  My hubby special orders soda that comes in glass bottles, still made with real sugar.   I call it his "crack"!   There are always so  many that I have been trying to figure out what to do with them.   I want to glitter some and texture others, but I just wasn't in the mood for that today.......so I thought I would try this

 


I figured it would work with a soda/beer bottle.  Only problem was I would have to paint the outside instead of the inside.  I knew I would drive myself crazy if I tried to do the inside.

I poured some modge podge into a small glass bowl, then added my food coloring.  I hadn't really planned on a color, I just grabbed the first food coloring that I saw. Kind of funny that it was same color as the pin.

Modge Podge with Food Coloring

At first I thought I would just do a portion of the bottles, but after a few minutes I decided to just paint the whole bottle.  I did two coats, and let them dry in front of the fireplace so they would dry quickly.

Red tinted bottles done with modge podge
Ignore the blue bottle.......

I knew that they needed dressed up a little so I grabbed my burlap, some scrap material and some rusted jingle bells.

Decorated Red Modge Podge Tinted Bottles

I still wanted to add a little more to them.......
Source: via Karen on Pinterest

I figured I still had a lot of coffee filters left from my wreaths so this could be the perfect filler for the center of the bottle.  Super simple, cut however you want.  There is no right or wrong pattern.  Once I had it cut I just went back to my handy dandy modge podge and slapped it on the bottle

Snowflake waiting to be put on bottle

I will say that this is something that looks much better in person.  I will set the bottles somewhere in my house.  These are not my favorite project.  Outcome is just ok to me....

Finished red tinted modge podge bottle with snowflake

Follow Me on Pinterest

Sunday, November 11, 2012

Pin No. 11, 12 & 13 Clipboards, Coasters & Magnets

I just love it when one of the kids comes to me with a last minute request.  The other night one of the girls comes to me "Mom I need a few Colts things for our classroom basket."  I'm thinking no problem, then I ask "When do you need them?" and she replies "oh, tomorrow"  UGH!!!  I love crafting but do not love rush projects.  Rushing tends to zap the fun and relaxation out of it!  I started scanning my pins for something that would look decent and be quick.....we finally settled on these pins.

Source: etsy.com via Nicole on Pinterest

 I had thankfully picked up clipboards when I stumbled across them at the Dollar Tree.  I had wanted them for teachers gifts this year. I had some scrapbook paper with blues but wanted to add something Colts to it, so I just searched for some images I liked and I used powerpoint to make them the size I needed.   I did the same thing for the coasters.   I bought the cork circles at Hobby Lobby, they weren't very expensive, then found images and made them circles in powerpoint and printed them out.  The clipboard and coasters were made pretty much the same way.  Good old Modge Podge! 
The bottlecap magenets we cheated a bit with.  I had already made the bottlecaps for bows and keychains so we just used some E6000 to glue on magnets and we were good to go.  Here is what we ended up with.
clipboard

Definately will be doing all of these again.  They were really quick and really simple!
Follow Me on Pinterest