Showing posts with label holiday decoration. Show all posts
Showing posts with label holiday decoration. Show all posts

Saturday, December 15, 2012

Pin 55 Using Glue Dots & Glitter To Upcycle old Glade Candle Jars

A little while back I showed how to clean out your old candle jars ( Pin 22).  It took me a while to figure out what I wanted to do with them.  The bigger ones I knew I wanted to put in the kids bathroom for cotton balls & qtips,  but the smaller ones I figured would still hold candles.  I didn't want them to be boring, but couldn't figure out how to spruce them up.  I searched through my pins, but nothing really "spoke" to me.  So I sat staring at my screen, all my boards were pulled up, I was just staring and staring at all the board covers.....why was nothing moving me?!?!  I had been concentrating on my craft, upcycle and for the home boards.  Turns out I should have been paying attention to my Easter board. My poor Easter board only has one lonely pin, but turns out it was just the pin I needed.

Source: bhg.com via Nicole on Pinterest

Now I know that these are Easter Eggs, but they gave the inspiration to put glitter polka dots on my candle holders.  All you need is Glitter, which I love, and Glue Dots, which I love! 

Permanent Glue Dots and Repurposed Glade Candle Holde or Votive Holder waiting on glitter polka dots to be added

Take whatever container you have that you would like to add glitter polka dots to and make sure it is clean.  Then just place your glue dots where you want them. Ignore the spray paint on my hand, and the glitter I already managed to get on the candle.....(What can I say, I'm just having a messy day!)

Placing Glue Dots on a Candle Votive to add Glitter Polka Dots

Now it's time to glitter......I LOVE glitter!  Fine glitter worked much better.   The easiest way I found to apply the glitter was to dip my finger in it then tap it onto the glue dot.  It wasn't as messy this way, and the glitter stuck better since I was pressing it into the glue dot.  This is a really quick project.

Upcycled Glade Candle Jar, turned glitter polka dot votive holder using glue dots

Ignore the fact that I didn't really brush the loose glitter off yet.......I was in a hurry to move on to my next one.   Trying to finish up crafting for the night so the kids and I can settle in and watch Ice Age Continental Drift.  Gotta love family movie nights, especially when they will be illuminated by my newest glitter polka dot creations.

Follow Me on Pinterest

Tuesday, December 11, 2012

Pin 46, 47 & 48 Felt Wreath and Felt flowers and keeping Pipe Insulation from bending or being odd shaped

Pin 46  The Felt Wreath


I am totally into wreaths right now.   I'm not sure why.  Could be that I just am happy to cover some of my bare walls, or the fact that I have been really pleased with all the ones that I have tried so far (probably both).  The kids have their own TV area upstairs in the loft.   It is a good size room and one of the remaining areas that I haven't really decorated.  I wanted to make something to hang on the walls.  While there are a few thing up, they still look pretty empty.   I came across this wreath and thought it would be perfect.


I wanted to do the wreath in Ohio State colors, which I already had on hand.  So I went and grabbed my Scarlet and Grey felt, and tried to make sure I had enough.  I used the 8x11 sheets you can grab at Hobby Lobby because I had a ton of them already.  If you have to go out and buy felt for this project I would suggest buying it by the yard in the fabric department.  2/3 of a yard should be about what you need  for one wreath.....If you are using the sheets you will need at least 12-15 sheets, maybe more depending on how tightly you place your circles.

For this project:

Felt
3" Circle Template
Sharpie
Scissors
Pins (General purpose, the "normal" silver ones)
Wreath Form
Any Embellishments you might want to add
Ribbon to hang your wreath
Hot Glue Gun/ Glue Sticks (for embellishments)

I traced the bottom of a soup can onto a piece of cereal box that was heading for the recycling bin, and used that as my template.  Then I spent what felt like the next 20 years of my life tracing circles onto the felt.  I was doing enough to make two wreaths.

Red and Grey Felt traced and waiting to be cut

Once you get them all traced you get to cut them all out.   When you are cutting them out, cut on the inside of the black line so you don't see any of the black marker on your circles.  I thought tracing felt like it took forever, well then cutting out the circles felt like it took an eternity.

scraps from cutting out all the circles for felt wreathPiles of  circles for felt wreath

Once you have your million or so circles (about 120-150 actually per color) It's time to gather your wreath form and pins.  I used pipe insulation from a home improvement store to make my wreath forms. 

Pipe Insulation as a wreath form

Take a felt circle and fold it in half

Felt Circle Folded in Half

Then fold it in half again.

Felt Circle Folded In Half, then Half Again

Place your folded circle over the wreath form and use your pins to attach.  I found if you put your pins in at an angle they hold more securely..  I started filling in my wreath in the middle and outsides first.
Felt circles being pinned to the wreath form for a felt wreath

 Just keep pinning in your circles till your wreath is full.  Halfway through mine I realized that I didn't like the red and grey together in the wreath.   I took mine apart and started fresh, making one all red and one all grey.  This time I didn't fill in middle and outside first.........


Restarted all grey felt wreath

and the finished product
Finished OSU colors felt wreaths


I really kind of like these.  I need to pick up a few more pieces of grey felt to fill in a few gaps, but that won't take long.  If your looking for a simple project I would suggest giving this one a try.

Pin 47  Felt Flowers

I have seen the felt flowers all over, and thought they would be the perfect embellishment for the felt wreath......plus I already had the circles cut! 


or
Source: saifou.com via Nicole on Pinterest

I folded my circles the same way I did for the wreath.  I glued mine, I did not sew them.   Follow the directions and just glue instead of sew.   If I had been making these for something that might be handled on a regular basis, like as a hair accessory or a pin then I would have sewn them.  These were going on the wreath so hot glue was fine.

Finished Grey Felt Flower

Because the felt is thicker then the material used in the first pin, this only took 6 circles.  4 for the base and two in the middle, and they fluffed up and made it look full.   If anyone would like more detailed pictures just leave a comment. 

Pin 48  Keeping Pipe Insulation used as a Wreath Form from Bending & Creasing.


Using Pipe Insulation can be a little tricky.  It doesn't always like to cooperate and stay in a circle.  It likes to bend and crease, and many times look more like an oval than a circle.   If you have tried it and got discouraged, please read this next pin and give it another try!




 

 Following her method really does make a difference.  If you haven't tried using pipe insulation as a wreath form,  I love it.  It is much cheaper, and once you get the hang of it, pretty easy to work with.  If you have tried it before,  please don't be afraid to try it again.


Follow Me on Pinterest

Thursday, November 29, 2012

Pins 33, 34 Tinting glass bottles with Food Coloring & Modge Podge and Coffee Filter Snowflakes

I always seem to have a ton of bottles on my counter.  My hubby special orders soda that comes in glass bottles, still made with real sugar.   I call it his "crack"!   There are always so  many that I have been trying to figure out what to do with them.   I want to glitter some and texture others, but I just wasn't in the mood for that today.......so I thought I would try this

 


I figured it would work with a soda/beer bottle.  Only problem was I would have to paint the outside instead of the inside.  I knew I would drive myself crazy if I tried to do the inside.

I poured some modge podge into a small glass bowl, then added my food coloring.  I hadn't really planned on a color, I just grabbed the first food coloring that I saw. Kind of funny that it was same color as the pin.

Modge Podge with Food Coloring

At first I thought I would just do a portion of the bottles, but after a few minutes I decided to just paint the whole bottle.  I did two coats, and let them dry in front of the fireplace so they would dry quickly.

Red tinted bottles done with modge podge
Ignore the blue bottle.......

I knew that they needed dressed up a little so I grabbed my burlap, some scrap material and some rusted jingle bells.

Decorated Red Modge Podge Tinted Bottles

I still wanted to add a little more to them.......
Source: via Karen on Pinterest

I figured I still had a lot of coffee filters left from my wreaths so this could be the perfect filler for the center of the bottle.  Super simple, cut however you want.  There is no right or wrong pattern.  Once I had it cut I just went back to my handy dandy modge podge and slapped it on the bottle

Snowflake waiting to be put on bottle

I will say that this is something that looks much better in person.  I will set the bottles somewhere in my house.  These are not my favorite project.  Outcome is just ok to me....

Finished red tinted modge podge bottle with snowflake

Follow Me on Pinterest

Tuesday, November 27, 2012

Pin 24 Re-Visited The Coffee Filter Wreath

I was never totally happy with the first coffee filter wreath that I did.  It wasn't just my trimming...Lol!  That was just BAD!  There was just something off about the whole thing.  Don't get me wrong, I liked it enough.  I mean, it's still hanging in my Dining Room above the hutch.  Granted we don't use that room much......ha!  I decided to try it again.  Why not,  I still had everything I needed.

Inspiration Pins



 

This time I went with White filters instead of Natural.  Not really because I liked the look any better more because when I bought supplies the first time around  I bought two packs of each, and white was what was left.  I also knew this time I needed to be more careful as I placed the filters so I wouldn't have trim.  I just knew if I had trim this one, I would probably ruin it too! 

Supplies Needed:

Coffee Filters  (2 packs)
Wreath Form (cardboard cut in any shape you want would work)
Hot Glue Gun/Glue Sticks
Any Embellishments you might want to add
*Hanger

*I didn't use anything to hang it with.  The form itself sat just fine on the nail in the wall.

I used a MDF flat wreath form that I picked up at Micheal's.  A piece of cardboard cut in a circle would work well also.  The Coffee Filters barely weigh anything at all.

Wreath Form for Coffee Filter White WreathWhite Coffee Filters

I decided instead of folding them in half, then half again like I did last time that I was just going to fold them in half once.  This way I could just use one across the whole wreath instead of trying to lay two next to each other just right.
Coffee Filter White Wreath, the beginning

The hardest part for me was keeping the same space between each filter.  If you have the ability to trim things evenly then this wouldn't be that big of deal.  I was just determined to not trim this wreath. I had my doubts that this one was going to be better......

Coffee Filter Wreath...a little more progress
 Just keep going around the whole circle.  It will feel like it is taking forever.   I caught up on a few episodes of Dexter and did a couple loads of laundry while making mine.   Once they are all glued on you can decide if you want to keep it plain or add any embellishments.   I decided to add some glitter (which I still need to even out) and a few embellishments.  

Finished White Coffee Filter Wreath..
Finished White Coffee Filter on wall
White Coffee Filter Wreath hanging in Bathroom

This is a bigger wreath then  the first one I did and I used less coffee filters for this one.  It went pretty quick and once I even out the glitter I will be happy with this one.  Best thing was that I didn't have to trim this one at all!  Woot!  Woot!

Follow Me on Pinterest

Monday, November 26, 2012

Pin 28 & 29 The Ornament Wreath and Pipe insulation as a Wreath Form

It seems no matter where I go I see Ornament Wreaths, whether it be online or in the store, they are everywhere.  I'm a huge fan of the wreath, but not so much of the price tag.  Pinterest is full of examples and how to's, so I thought I can do this.  After making a few I can see why they cost what they do.....they use a TON of ornaments.

 
Source: pinerly.com via Nicole on Pinterest
Source: google.com via Nicole on Pinterest

I didn't want to spend a lot of money on fancy ornaments.  I wanted to wait and see if I could even make one that I would want to hang up for all to see.  I hit up the Dollar Tree.  I bought 15 packs of ornaments for each wreath.  I actually had bought that many because I wanted to use some as fillers in vases, but turned out I needed them.  So my theory is after you think you have enough in your cart, add a couple more.  The first one I did I used a white Styrofoam form from Micheal's.  The second I tried using some pipe insulation as a wreath form from another pin



 

What You Need:

Ornaments (and lots of 'em)
Hot Glue Gun/Glue Sticks
String or Ribbon to Hang the Wreath
Wreath Form or Pipe Insulation
*Garland or Ribbon to wrap Wreath Form
*Duct Tape
Embellishments if wanted

*You only need the duct tape if you are using the pipe insulation, and wrapping your wreath form with garland or ribbon is optional. It helps hide any gaps between ornaments.

I took my insulation, realized that I needed it just a bit bigger, cut some off another piece and duct taped them together.  I didn't measure......I just eyeballed it and went with what I thought would look right. I didn't end up with a perfect circle (I think because of the added piece) but decided, the heck with it and moved on to the next step.

Pipe InsulationPipe Insulation as Wreath Form

Ignore the Halloween Tablecloth......It's my "crafting" tablecloth.  This way I don't have to try and be neat...lol!  Next you are going to take your garland/ribbon and wrap the wreath.  I was not precise about mine.  I bought my garland at the Dollar Tree.  I attached my string to hang it with at this point in the project also.
Garlandgarland wrapped around wreath form

Now you want to take your bigger bulbs and glue them along the inside and outside of the wreath form.
Ornaments around the outsideOrnaments around outside and inside

Take your smaller bulbs and basically just fill in the wreath.  Just go with whatever looks right to you.  I used 3 different sized bulbs.  I used the larger ones to line the inside and outside of the wreath form, the medium ones along the edge of the ornaments and the wreath, and the smaller ones to fill in the gaps.
Filling in the Gaps with Smaller Ornaments

Once you get all your gaps filled in you can add any embellishments that you want to add.  I added a silver glittery bow (also the Dollar Tree)
Finished Red,Green, Silver Ornament Wreath

 I think it took me longer to open all the containers of ornaments then it did to put the wreath together.  Well.......once I stopped over thinking placement.  I was trying to put them in a pattern at first, then just went with whatever I picked up next.  Here is another one that I made.
Red and Gold Ornament Wreath

I really want to take the bulb off that is on the side sticking out, but once these babies are glued down they don't want to come off!  I really want to make a few more of these because they are pretty fun, and quick.  I just don't have anywhere else to put them.  I will be keeping my eye out for after the holiday sales, so I can get some different ornaments.

  Follow Me on Pinterest